Home > Products > Power Relocation & Cable Management

Power Relocation & Cable Management

Relocate power and manage the cables for your wall mounted display. Power and low voltage cables run behind the wall for a professional appearance. Perfect solutions for retrofitting and new construction.

Power Relocation & Cable Management
Power Jumper IC™
Power Jumper IC™ HDTV & Sound Bar Power Relocation Kit with Interconnect
M2PJCTVSW5White, 5 Feet
M2PJCTVSW15White, 15 Feet
Product Brochure
Installation Guide
Technical Drawing

The Power Jumper IC™ HDTV & Sound Bar Power Relocation Kit easily conceals power & A/V cables within the wall for a flat panel display and sound bar. The kit is pre-wired, recessed and features are a low profile in-wall jumper that can be fed through 1" diameter holes.

Power Jumper IC™ HDTV Power Relocation Kit Features:

  • Prewired, no electrician required for install
  • Female Jumper can be fed through 1" diameter holes
  • Strain Relief Bracket provides a solid connection between the interconnect ends
  • Pocket Plates™ provide recessed receptacles for plugs
  • Décor Brush Plates and SPEEDPORT™ allow for clean cable pass-throughs

Kit Includes:

  • (2) 2-Gang Recessed Boxes w/ Décor Brush Plate pre-installed
  • (1) 1-Gang Recessed Box
  • (1) Overmolded Display Power Receptacle
  • (1) Overmolded Sound Bar Power Receptacle
  • (1) Overmolded Premise Power Inlet
  • (1) 2" SPEEDPORT™ with Grommet
  • (1) 6’ Right Angle IEC Power Cord
  • (4) Interconnect Strain Relief Brackets
  • Screw Hardware

Specifications:

  • Electrical Rating: 125 VAC, 15 AMPS, 60 Hz
  • Meets UL 817 & CSA#22.2#21
  • Interconnect meets UL 2256, 2459
  • Meets NEC 2014 Article 400.7 (A)(11)
Power Jumper IC™

The Power Jumper IC™ has patented components with additional patents pending.

Power Jumper IC™
Power Jumper IC™ HDTV Power Relocation Kit with Interconnect
M2PJCTVW5White, 5 Feet
M2PJCTVW15White, 15 Feet
Product Brochure
Installation Guide
Technical Drawing

The Power Jumper IC™ HDTV Power Relocation Kit easily conceals power & A/V cables within the wall for a flat panel display. The kit is pre-wired, recessed and features are a low profile in-wall jumper that can be fed through 1" diameter holes.

Power Jumper IC™ HDTV Power Relocation Kit Features:

  • Prewired, no electrician required for install
  • Female Jumper can be fed through 1" diameter holes
  • Strain Relief Bracket provides a solid connection between the interconnect ends
  • Pocket Plates™ provide recessed receptacles for plugs
  • Décor Brush Plates allow for clean cable pass throughs

Kit Includes:

  • (2) 2-Gang Recessed Box w/ Décor Brush Plate
  • (1) Overmolded Display Power Receptacle
  • (1) Overmolded Premise Power Inlet
  • (1) 6’ Right Angle IEC Power Cord
  • (2) Interconnect Strain Relief Bracket
  • Screw Hardware

Specifications:

  • Electrical Rating: 125 VAC, 15 AMPS, 60 Hz
  • Meets UL 817 & CSA#22.2#21
  • Interconnect meets UL 2256, 2459
  • Meets NEC 2014 Article 400.7 (A)(11)
Power Jumper IC™

The Power Jumper IC™ has patented components with additional patents pending.

Power Jumper IC™
Power Jumper IC™ Sound Bar Power Relocation Kit with Interconnect
M2PJCSW3White, 3 Feet
Product Brochure
Installation Guide
Technical Drawing

The Power Jumper IC™ Sound Bar Power Relocation Kit easily conceals power & A/V cables within the wall for a flat panel display and sound bar. This kit is perfect for newer wiring where there is a live receptacle higher up on the wall behind the display. The kit is pre-wired, recessed and features are a low profile in-wall jumper that can be fed through 1" diameter holes.

Power Jumper IC™ HDTV Power Relocation Kit Features:

  • Prewired, no electrician required for install
  • Female Jumper can be fed through 1" diameter holes
  • Strain Relief Bracket provides a solid connection between the interconnect ends
  • Pocket Plates™ provide recessed receptacles for plugs
  • Décor Brush Plates and SPEEDPORT™ allow for clean cable pass-throughs

Kit Includes:

  • (2) 2-Gang Recessed Boxes w/ Décor Brush Plate pre-installed
  • (1) 1-Gang Recessed Box
  • (1) Overmolded Display Power Receptacle
  • (1) Overmolded Sound Bar Power Receptacle
  • (1) Overmolded Premise Power Inlet
  • (1) 2" SPEEDPORT™ with Grommet
  • (1) 6’ Right Angle IEC Power Cord
  • (4) Interconnect Strain Relief Brackets
  • Screw Hardware

Specifications:

  • Electrical Rating: 125 VAC, 15 AMPS, 60 Hz
  • Meets UL 817 & CSA#22.2#21
  • Interconnect meets UL 2256, 2459
  • Meets NEC 2014 Article 400.7 (A)(11)
Power Jumper IC™

The Power Jumper IC™ has patented components with additional patents pending.


Power Jumper™
HDTV Power Relocation Kit
22APJW-7RWhite
22APJLA-7RLight Almond
22APJIV-7RIvory
22APJB-7RBlack
ETL Listed 3163781
Multiple Patents Pending

Easily relocate power to your wall mounted HDTV without the need of an electrician.

  • Provides an affordable power solution for wall mounted flat panel TVs
  • Perfect for retro-fit construction projects
  • Prewired – No electrician required!
  • Conceal wiring within the wall
  • Meets NEC Code
  • UL 817, CSA#22.2#21
  • Can be used with remote Surge/Power Conditioner to HDTV.
  • Available in White

    Power Jumper™ HDTV Power Relocation Kit includes:
    (2) 2-Gang Recessed Boxes
    (2) 2-Gang Frames
    (2) 2-Gang Décor Brush Plates
    (2) Wall Plates
    (1) PJW-7R Premise Powered Power Feed
    (1) 6 ft. Right Angle IEC 60320 CY13 to NEMA 5-13P Cord Set
    Screw Hardware

Installation Instructions

HDTV Power Relocation Kit - Metal Clad (MC)
22APJW-7R-MCWhite
22APJLA-7R-MCLight Almond
22APJIV-7R-MCIvory
22APJB-7R-MCBlack
ETL Listed 3163781
Multiple Patents Pending

Easily relocate power to your wall mounted HDTV without the need of an electrician.

  • Provides an affordable power solution for wall mounted flat panel TVs
  • Perfect for retro-fit construction projects
  • Prewired – No electrician required!
  • Conceal wiring within the wall
  • Meets NEC Code
  • UL 817, CSA#22.2#21
  • Can be used with remote Surge/Power Conditioner to HDTV.
  • Available in White

    Power Jumper™ HDTV Power Relocation Kit includes:
    (2) 2-Gang Recessed Boxes
    (2) 2-Gang Frames
    (2) 2-Gang Décor Brush Plates
    (2) Wall Plates
    (1) Metal Clad PJW-7R Premise Powerered Power Feed
    (1) 6 ft. Right Angle IEC 60320 CY13 to NEMA 5-13P Cord Set
    Screw Hardware

Installation Instructions

Power Jumper™
Overmolded Duplex Receptacle Kit
2AOM52DWhite
ETL Listed 3163781
Multiple Patents Pending

Easily relocate power to your wall mounted HDTV

• Great sollution for recessed receptacle in shallow wall depths
• Easy Installation - 1-Piece Design
• Perfect for retro-fit construction projects
• Pre-wired and overmolded duplex receptacle with 7’ electrical wire.
• Feed power remotely to your HDTV flat panel and hide cables within the wall.
• 1.5” Recessed depth
• Power rating 15A, 125V
• UL 817, CSA#22.2#21

Power Jumper™ Overmolded Duplex Receptacle Kit includes:
(1) Double Gang Pocket Plate™
(1) Décor Brush Insert
(1) Overmolded Duplex receptacle with 7' electrical wire pigtail end.

IEC Power Inlet & Right Angle Power Cord
IEC-46W-6RA

Provide remote power and surge protection to your wall mounted HDTV with the Midlite IEC Power Inlet. The IEC wall plate fits flush to wall, typically used in A/V and applicance applications such as Flat Screen TVs and Projectors.

  • Installs into a standard 14 cu. inch or large electrical box
  • 120 Vac, 15 Amp, 60 Hz.
  • ETL Listed – UL and CSA Rated

    Includes:
    Overmolded Power Inlet with 6” NM-B 14-13 pigtail
    6 ft. Right Angle Power Cord
    Wall Plate
    Screw Hardware

Installation Instructions



Power+Port™ Kit—HDTV Power Solution with 3 ft cord
A2GESR-W-3White
A2GESR-LA-3Light Almond
A2GESR-I-3Ivory
A2GESR-B-3Black
Plug Recessed Clearance 1.4''
ETL LIsted 3163781
Patented

Use MIDLITE’s® innovative patented Power+Port™ Kit—HDTV Power Solution, 125V, 15 amp to install power and low voltage cables behind your flat panel TV and audio and video devices.

  • Provides an affordable power solution for wall mounted flat panel TVs
  • Perfect for retro-fit construction projects
  • Includes 5 year warranty
  • Conforms to UL STD 514D and Certified CSA STD 22.2 42.1-00
    Meets ANSI/NEMA Standard Electrical Box Sizes
  • Can be used with remote Surge/Power Conditioner to HDTV.
  • Available in White, Light Almond, Ivory, and Black

    Power+Port™ Kit—HDTV Power Solution, includes:
    (1) 2-Gang Splitplate End, Recessed Receptacle and Wireport with Grommet
    (1) 2-Gang Splitplate End, Power Inlet and Wireport with Grommet
    (2) 2-Gang Dual Voltage Retro Work PVC boxes
    (1) 6 ft. 14 gauge, 15 amp Black Power Cord




Power+Port™ Kit—HDTV Power Solution with 6 ft cord
A2GESR-WWhite
A2GESR-LALight Almond
A2GESR-IIvory
A2GESR-BBlack
Plug Recessed Clearance 1.4''
ETL LIsted 3163781
Patented

Use MIDLITE’s® innovative patented Power+Port™ Kit—HDTV Power Solution, 125V, 15 amp to install power and low voltage cables behind your flat panel TV and audio and video devices.

  • Provides an affordable power solution for wall mounted flat panel TVs
  • Perfect for retro-fit construction projects
  • Includes 5 year warranty
  • Conforms to UL STD 514D and Certified CSA STD 22.2 42.1-00
    Meets ANSI/NEMA Standard Electrical Box Sizes
  • Can be used with remote Surge/Power Conditioner to HDTV.
  • Available in White, Light Almond, Ivory, and Black

    Power+Port™ Kit—HDTV Power Solution, includes:
    (1) 2-Gang Splitplate End, Recessed Receptacle and Wireport with Grommet
    (1) 2-Gang Splitplate End, Power Inlet and Wireport with Grommet
    (2) 2-Gang Dual Voltage Retro Work PVC boxes
    (1) 6 ft. 14 gauge, 15 amp Black Power Cord

Splitplate Recessed Receptacle
2GESR-5251-WWhite
2GESR-5251-LALight Almond
2GESR-5251-IIvory
2GESR-5251-BBlack
Plug Recessed Clearance 1.4''
ETL LIsted 3163781
Sold in Master Packs of 20
Patented

Use MIDLITE’s® innovative patented Power + Port™, 125V, 15 amp power receptacle and Wireport™ Wall Plate System to install power and low voltage cables behind your flat panel TV and audio and video devices. The modules are sold separately and can be pieced together to create several configurations as shown below. The Power + Port™ includes the 2GESR and 2GESP which is designed with patented keyed-tab features that hold both halves together and allow separate installation of each half.

  • AC powered recessed receptacle is the deepest available with a depth of 1.4" for plug clearance.
  • CE Professionals can install just the Wireport™ half (2GESP) and hand the powered receptacle half (2GESR) to a licensed electrician.
  • Multiple wall plate combinations can be built at the job site.
  • No extra sheet rock cutting required. Designed for use with 2-gang dual voltage box (old work or new work).
  • Standard double gang wall plate size for easier fit near panel mount brackets.
  • Think Green! This is the least plastic content product design in its class!
  • Conforms to UL STD 514D and Certified CSA STD 22.2 42.1-00
    Meets ANSI/NEMA Standard Electrical Box Sizes
Splitplate Recessed Power Inlet
2GESR-5266-WWhite
2GESR-5266-LALight Almond
2GESR-5266-IIvory
2GESR-5266-BBlack
Plug Recessed Clearance 1.4''
Sold in Master Packs of 20
Patented

Use MIDLITE’s® innovative patented Power + Port™, 125V, 15 amp Recessed Power Inlet and Wireport™ Wall Plate System to install power and low voltage cables behind your flat panel TV and audio and video devices. The modules are sold separately and can be pieced together to create several configurations as shown below. The Power + Port™ includes the 2GESR and 2GESP which is designed with patented keyed-tab features that hold both halves together and allow separate installation of each half.

  • AC powered recessed plug is the deepest available with a depth of 1.4" for plug clearance.
  • CE Professionals can install just the Wireport™ half (2GESP) and hand the powered receptacle half (2GESR) to a licensed electrician.
  • Multiple wall plate combinations can be built at the job site.
  • No extra sheet rock cutting required. Designed for use with 2-gang dual voltage box (old work or new work).
  • Standard double gang wall plate size for easier fit near panel mount brackets.
  • Think Green! This is the least plastic content product design in its class!
  • Conforms to UL STD 514D and Certified CSA STD 22.2 42.1-00
    Meets ANSI/NEMA Standard Electrical Box Sizes


Splitplate Wireport™ with Grommet
2GESP-GR10-WWhite
2GESP-GR10-LALight Almond
2GESP-GR10-IIvory
2GESP-GR10-BBlack
Hole Size 1.425'' (Diameter)
Hole Area 1.59'' (Sq. In.)
Sold in Master Packs of 20
Patented

Use MIDLITE’s® innovative patented Power + Port™, 125V, 15 amp power receptacle and Wireport™ Wall Plate System to install power and low voltage cables behind your flat panel TV and audio and video devices. The modules are sold separately and can be pieced together to create several configurations as shown below. The Power + Port™ includes the 2GESR and 2GESP which is designed with patented keyed-tab features that hold both halves together and allow separate installation of each half.

  • CE Professionals can install just the Wireport™ half (2GESP) and hand the powered receptacle half (2GESR) to a licensed electrician.
  • Multiple wall plate combinations can be built at the job site.
  • Cables can be fed through the Wireport™ with ease from the ceiling down and the floor up.
  • No extra sheet rock cutting required. Designed for use with 2-gang dual voltage box (old work or new work).
  • Standard double gang wall plate size for easier fit near panel mount brackets.
  • Think Green! This is the least plastic content product design in its class!
  • Conforms to UL STD 514D and Certified CSA STD 22.2 42.1-00
    Meets ANSI/NEMA Standard Electrical Box Sizes



Double Gang Décor In-Wall
Power Solution Kit with 3 ft cord
2A46-W-3White
2A46-LA-3Light Almond
2A46-I-3Ivory
2A46-B-3Black
Plug Clearance 1.1''
ETL LIsted 3163781
Patent Pending

Use MIDLITE’s® innovative patent pending Double Gang Décor In-Wall Power Solution, 125V, 15 amp to install power behind your flat panel TV and audio and video devices.

  • Provides an affordable power solution for wall mounted flat panel TVs
  • Perfect for retro-fit construction projects
  • Configurable Décor Power Modules
  • Fits in standard 14 cubic inch electric box
  • Includes 5 year warranty
  • Conforms to UL STD 514D and Certified CSA STD 22.2 42.1-00
    Meets ANSI/NEMA Standard Electrical Box Sizes
  • Can be used with remote Surge/Power Conditioner to HDTV.
  • Available in White, Light Almond, Ivory, and Black

    Décor Recessed Receptacle and Power Inlet Kit:
    (1) 1-Gang Décor Recessed Receptacle
    (1) 1-Gang Décor Recessed Power Inlet
    (2) Décor-Style Wireport™
    (2) 2-Gang Dual Voltage Retro Work PVC boxes
    (1) 3 ft. 14 gauge, 15 amp Black Power Cord




Double Gang Décor In-Wall
Power Solution Kit with 6 ft cord
2A46-WWhite
2A46-LALight Almond
2A46-IIvory
2A46-BBlack
Plug Clearance 1.1''
ETL LIsted 3163781
Patent Pending

Use MIDLITE’s® innovative patent pending Double Gang Décor In-Wall Power Solution, 125V, 15 amp to install power behind your flat panel TV and audio and video devices.

  • Provides an affordable power solution for wall mounted flat panel TVs
  • Perfect for retro-fit construction projects
  • Configurable Décor Power Modules
  • Fits in standard 14 cubic inch electric box
  • Includes 5 year warranty
  • Conforms to UL STD 514D and Certified CSA STD 22.2 42.1-00
    Meets ANSI/NEMA Standard Electrical Box Sizes
  • Can be used with remote Surge/Power Conditioner to HDTV.
  • Available in White, Light Almond, Ivory, and Black

    Décor Recessed Receptacle and Power Inlet Kit:
    (1) 1-Gang Décor Recessed Receptacle
    (1) 1-Gang Décor Recessed Power Inlet
    (2) Décor-Style Wireport™
    (2) 2-Gang Dual Voltage Retro Work PVC boxes
    (1) 6 ft. 14 gauge, 15 amp Black Power Cord




Power+Port™ Recessed Receptacle Kit
2A5251-WWhite
2A5251-LALight Almond
2A5251-IIvory
2A5251-BBlack
Plug Recessed Clearance 1.4''
ETL LIsted 3163781
Patented

Use MIDLITE’s® patented Power+Port™ Receptacle Kit to install power and low voltage cables behind your flat panel HDTV. The plates separate for ease of installation of power and low voltage cables. The recessed depth to plug power into the wall is the deepest in the industry for flush to the wall surface installation.

  • Used for retro-fit construction projects
  • Includes 5 year warranty
  • Conforms to UL STD 514D and Certified CSA STD 22.2 42.1-00
    Meets ANSI/NEMA Standard Electrical Box Sizes
  • Available in White, Light Almond, Ivory, and Black

    Power+Port™ Kit—HDTV Power Solution, includes:
    (1) 2-Gang Splitplate End, Recessed Receptacle and Wireport with Grommet
    (2) 2-Gang Dual Voltage Retro Work PVC boxes




Power+Port™ Recessed Receptacle Kit and Wireport™ Plate with Grommet
2A5251-1G-WWhite
2A5251-1G-LALight Almond
2A5251-1G-IIvory
2A5251-1G-BBlack
Plug Clearance 1.4''
ETL LIsted 3163781
Patented

Use MIDLITE's® innovative patented Power+Port Recessed Receptacle Kit and Wireport Plate with Grommet to install power behind your flat panel and pass low voltage cables through the wall from your AV Equipment. The plates separate for ease of installation of power separately from low voltage cables. The recessed depth to plug power into the wall is the deepest in the industry for flush to the wall surface installation.

  • Used for retro-fit construction projects
  • Includes 5 year warranty
  • Conforms to UL STD 514D and Certified CSA STD 22.2 42.1-00
    Meets ANSI/NEMA Standard Electrical Box Sizes
  • Available in White, Light Almond, Ivory, and Black

Power+Port™ Recessed Receptacle Kit and Wireport™ Plate with Grommet includes:
(1) 2-Gang Splitplate End, Recessed Receptacle and Wireport with Grommet
(1) 2-Gang Dual Voltage Retro Work PVC boxes
(1) Single Gang Wireport™ Plate with Grommet
(1) 1-Gang Low Voltage Mounting Bracket

Décor Recessed Receptacle Double Gang Kit and Décor Wireport™ Plate
2A4641-1G-WWhite
2A4641-1G-LALight Almond
2A4641-1G-IIvory
2A4641-1G-BBlack
Plug Clearance 1.1''
ETL LIsted 3163781
Patent Pending

Use MIDLITE’s® patent pending Décor Recessed Receptacle and Décor Wireport™ Plate install power and low voltage cables behind your flat panel and pass low voltage cables through the wall from your AV Equipment.

  • Used for retro-fit construction projects
  • Includes 5 year warranty
  • Conforms to UL STD 514D and Certified CSA STD 22.2 42.1-00
    Meets ANSI/NEMA Standard Electrical Box Sizes
  • Available in White, Light Almond, Ivory, and Black

    Décor Recessed Receptacle Double Gang Kit and Decor Wireport™ Plate includes:
    (1) 1-Gang Decor Recessed Receptacle
    (2) Décor Wireport™ Plate
    (1) Single Gang Décor Wall Plate
    (1) Double Gang Décor Wall Plate
    (1) 2-Gang Dual Voltage Retro Work PVC box
    (1) 1-Gang Low Voltage Mounting Bracket

Décor Recessed Receptacle
Double Gang Kit
2A4641-WWhite
2A4641-LALight Almond
2A4641-IIvory
2A4641-BBlack
Plug Clearance 1.1''
ETL LIsted 3163781
Patent Pending

Use MIDLITE’s® patent pending Décor Recessed Receptacle Double Gang Kit to install power and low voltage cables behind your flat panel HDTV

  • Used for retro-fit construction projects
  • Includes 5 year warranty
  • Conforms to UL STD 514D and Certified CSA STD 22.2 42.1-00
    Meets ANSI/NEMA Standard Electrical Box Sizes
  • Available in White, Light Almond, Ivory, and Black

    Décor Recessed Receptacle Double Gang Kit:
    (1) 1-Gang Decor Recessed Receptacle
    (1) Décor Wireport™ Plate
    (1) Double Gang Décor Wall Plate
    (1) 2-Gang Dual Voltage Retro Work PVC box



Duplex Receptacle with Wireport™
DR2G-GR10-WHWhite
DR2G-GR10-LALight Almond
DR2G-GR10-IVIvory
DR2G-GR10-BKBlack
Hole Size 1.425'' (Diameter)
Hole Area 1.59'' (Sq. In.)
Sold in Master Packs of 25
Patent Pending

The new Duplex Receptacle and Wireport™ with Grommet offers the CE Professional the flexibility to consolidate a standard duplex receptacle into a 1 gang Wireport™ plate for an even cleaner experience and better in wall cable pass through look. Locate this combination next your home theater equipment, ceiling projector, ceiling drops for flat T.V.s, Bose Subwoofer Power Module, and in small office environments where your network gear receives CAT5e/CAT6 and other low voltage cabling.

The grommet insert only opens where cabling is present and maintains a closed area leaving an aesthetically clean appearance. Just one cable or multiple cables will look equally presentable. Cables behind the wall can be fed from either the floor up or the ceiling down with ease. The Wireport™ eliminates the need for plate connectors and provides a clean professional appearance to your custom installation. Mounts directly to a dual voltage electrical box. Plate is MID-Sized™ to cover imperfections in and around the sheet rock area of the dual voltage electrical box.



Recessed Receptacle
M5251WWhite
M5251SSStainless Steel
Hole Size 1.375'' (Diameter)
Hole Area 1.484
Use MIDLITE’s® innovative 125V, 15 amp recessed receptacle to install power and low voltage cables behind your flat panel TV and audio and video devices.
  • Provides an affordable power solution for wall mounted flat panel TVs
  • Perfect for retro-fit construction projects
  • UL recognized Receptacle. Meets National Electrical Code requirements
  • Cables can be fed from the floor up and the ceiling down with ease
  • For use with 2-gang dual voltage box (old work or new work)
  • Plates are made of stainless steel or metal with a powder coat finish
  • Includes 1.375" feed-thru opening with Black grommet
Suggestions &
Product Ideas

Got a winning idea?