Home > Products > New Products

New Products

MIDLITE strives to grow our product line through innovative and top quality product designs to better serve our customers.

View our newest products below.

New Products
Power Jumper IC™
SONOS® In-Wall Power & Mounting Solution
C7HS-BBlack, 8' In-Wall Jumper
C7HS-WWhite, 8' In-wall Jumper
Conforms to STD 514D, No. 42.1-00
Electrical Rating: 125 VAC, 15 AMPS, 60 Hz
Meets UL 817 & CSA#22.2#21
Patented with multiple patents pending.
Now Available!


Utilizing the Power Jumper IC™ in-wall interconnect and the Speedport™ SC the SONOS® Speaker Mount and In-Wall Power Solution is the perfect tool when installing wall mounted wireless speakers.

The Power Jumper IC™ in-wall interconnects provide easy power relocation that does not require an electrician. By simply inserting the two ends together and fastening with a strain relief bracket, power is secured within the wall and hidden from view.

The mounting solution is compatible with any 1/4-20 mounted speaker and will tighten both into the speaker and into the Speedport™ when fastened. Additional low voltage cables such as Cat5 can also be passed through the Speedport™.

All rights reserved. Sonos is a registered trademark of Sonos, Inc.


Single Gang Splitport™ with Grommet
1GSWH-GR1White
1GSIV-GR1Ivory
1GSAL-GR1Almond
1GSLA-GR1Light Almond
1GSBK-GR1Black
Hole Size 1.5'' (Diameter)
Dimensions: 4.51x2.75x0.25"
Sold in Master Packs of 25
Patented
The Splitport™ plate is designed with keyed tab features to structurally withstand pulling and pushing of cables as the installer organizes them for a neat "dress out presentation." Installing the Splitport™ plate is easy. Install one half and then the second half, all while the cabling is held or lying naturally out of the way, or just assemble around the cables and slide into position and secure to electrical box. Add the grommet insert to maintain a closed area leaving an aesthetically clean appearance.



Tamper Resistant Discrete Décor Recessed Outlet
DDR12515-WHWhite
DDR12515-BKBlack
DDR12515-LALight Almond
DDR12515-ALAlmond
DDR12515-IVIvory
DDR12515-BRBrown

The MIDLITE Tamper Resistant Discrete Décor Recessed Outlet is a first of its kind wiring device that provides recessed power for home and business applications.

Using a standard 18 cubic inch or other deep electrical box, the Discrete Décor Recessed Outlet allows installers to push electronics or furniture closer to the wall, without concerns of damaging or disconnecting power cords.



Double Gang Splitport™ with Grommet
2GSWH-GR2White
2GSIV-GR2Ivory
2GSAL-GR2Almond
2GSLA-GR2Light Almond
2GSBK-GR2Black
Hole Size 2'' (Diameter)
Hole Area 3.14'' (Sq. In.)
Sold in Master Packs of 25
Patented
The Splitport™ plate is designed with keyed tab features to structurally withstand pulling and pushing of cables as the installer organizes them for a neat "dress out presentation." Installing the Splitport™ plate is easy. Install one half and then the second half, all while the cabling is held or lying naturally out of the way, or just assemble around the cables and slide into position and secure to electrical box. Add the grommet insert to maintain a closed area leaving an aesthetically clean appearance.
Power Jumper IC™
Power Jumper IC™ HDTV & Sound Bar Power Relocation Kit with Interconnect
M2PJCTVSW5White, 5 Feet
M2PJCTVSW15White, 15 Feet
Product Brochure
Installation Guide
Technical Drawing

The Power Jumper IC™ HDTV & Sound Bar Power Relocation Kit easily conceals power & A/V cables within the wall for a flat panel display and sound bar. The kit is pre-wired, recessed and features are a low profile in-wall jumper that can be fed through 1" diameter holes.

Power Jumper IC™ HDTV Power Relocation Kit Features:

  • Prewired, no electrician required for install
  • Female Jumper can be fed through 1" diameter holes
  • Strain Relief Bracket provides a solid connection between the interconnect ends
  • Pocket Plates™ provide recessed receptacles for plugs
  • Décor Brush Plates and SPEEDPORT™ allow for clean cable pass-throughs

Kit Includes:

  • (2) 2-Gang Recessed Boxes w/ Décor Brush Plate pre-installed
  • (1) 1-Gang Recessed Box
  • (1) Overmolded Display Power Receptacle
  • (1) Overmolded Sound Bar Power Receptacle
  • (1) Overmolded Premise Power Inlet
  • (1) 2" SPEEDPORT™ with Grommet
  • (1) 6’ Right Angle IEC Power Cord
  • (4) Interconnect Strain Relief Brackets
  • Screw Hardware

Specifications:

  • Electrical Rating: 125 VAC, 15 AMPS, 60 Hz
  • Meets UL 817 & CSA#22.2#21
  • Interconnect meets UL 2256, 2459
  • Meets NEC 2014 Article 400.7 (A)(11)
Power Jumper IC™

The Power Jumper IC™ has patented components with additional patents pending.

Power Jumper IC™
Power Jumper IC™ HDTV Power Relocation Kit with Interconnect
M2PJCTVW5White, 5 Feet
M2PJCTVW15White, 15 Feet
Product Brochure
Installation Guide
Technical Drawing

The Power Jumper IC™ HDTV Power Relocation Kit easily conceals power & A/V cables within the wall for a flat panel display. The kit is pre-wired, recessed and features are a low profile in-wall jumper that can be fed through 1" diameter holes.

Power Jumper IC™ HDTV Power Relocation Kit Features:

  • Prewired, no electrician required for install
  • Female Jumper can be fed through 1" diameter holes
  • Strain Relief Bracket provides a solid connection between the interconnect ends
  • Pocket Plates™ provide recessed receptacles for plugs
  • Décor Brush Plates allow for clean cable pass throughs

Kit Includes:

  • (2) 2-Gang Recessed Box w/ Décor Brush Plate
  • (1) Overmolded Display Power Receptacle
  • (1) Overmolded Premise Power Inlet
  • (1) 6’ Right Angle IEC Power Cord
  • (2) Interconnect Strain Relief Bracket
  • Screw Hardware

Specifications:

  • Electrical Rating: 125 VAC, 15 AMPS, 60 Hz
  • Meets UL 817 & CSA#22.2#21
  • Interconnect meets UL 2256, 2459
  • Meets NEC 2014 Article 400.7 (A)(11)
Power Jumper IC™

The Power Jumper IC™ has patented components with additional patents pending.

Power Jumper IC™
Power Jumper IC™ Sound Bar Power Relocation Kit with Interconnect
M2PJCSW3White, 3 Feet
Product Brochure
Installation Guide
Technical Drawing

The Power Jumper IC™ Sound Bar Power Relocation Kit easily conceals power & A/V cables within the wall for a flat panel display and sound bar. This kit is perfect for newer wiring where there is a live receptacle higher up on the wall behind the display. The kit is pre-wired, recessed and features are a low profile in-wall jumper that can be fed through 1" diameter holes.

Power Jumper IC™ HDTV Power Relocation Kit Features:

  • Prewired, no electrician required for install
  • Female Jumper can be fed through 1" diameter holes
  • Strain Relief Bracket provides a solid connection between the interconnect ends
  • Pocket Plates™ provide recessed receptacles for plugs
  • Décor Brush Plates and SPEEDPORT™ allow for clean cable pass-throughs

Kit Includes:

  • (2) 2-Gang Recessed Boxes w/ Décor Brush Plate pre-installed
  • (1) 1-Gang Recessed Box
  • (1) Overmolded Display Power Receptacle
  • (1) Overmolded Sound Bar Power Receptacle
  • (1) Overmolded Premise Power Inlet
  • (1) 2" SPEEDPORT™ with Grommet
  • (1) 6’ Right Angle IEC Power Cord
  • (4) Interconnect Strain Relief Brackets
  • Screw Hardware

Specifications:

  • Electrical Rating: 125 VAC, 15 AMPS, 60 Hz
  • Meets UL 817 & CSA#22.2#21
  • Interconnect meets UL 2256, 2459
  • Meets NEC 2014 Article 400.7 (A)(11)
Power Jumper IC™

The Power Jumper IC™ has patented components with additional patents pending.


Universal Cable Pass Thru,
Fastening & Anchor System
2-inch Hole Size Diameter
R1SP-W (Qty 1)White
R1SP-B (Qty 1) Black
R1SP-A (Qty 1) Almond
R1SP-LA (Qty 1) Light Almond
R1SP-I (Qty 1)Ivory
R1SP-BR (Qty 1) Brown
• Opening Size (dia.) 1.55
• Opening Size with Grommet (dia.) 1.36
• Wall Hole Size (dia.) 2
Product Brochure
Installation Guide
Technical Drawing
Universal Cable Pass Thru & Wall Anchor System

  • Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking
  • Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture

    The SPEEDPORT™ is the first universal cable pass thru, fastening and wall anchor system. The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation.

    Installation is quick and simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Low voltage brackets are no longer needed - reducing labor and a whole lot of mess from hand cutting large rectangular holes. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.

    Unmatched versatility, ease of installation and its cost/labor reducing features make the SPEEDPORT™ the ideal solution for your cable pass thru and mounting needs.



  • Universal Cable Pass Thru,
    Fastening & Anchor System
    2 3/8-inch Hole Size Diameter
    R2SP-W (Qty 1) • 2SP-W (Qty 5)White
    R2SP-B (Qty 1) • 2SP-B (Qty 5)Black
    R2SP-A (Qty 1) • 2SP-A (Qty 5)Almond
    R2SP-LA (Qty 1) • 2SP-LA (Qty 5)Light Almond
    R2SP-I (Qty 1) • 2SP-I (Qty 5)Ivory
    R2SP-BR (Qty 1) • 2SP-BR (Qty 5)Brown
    • Hole Size (dia.) 1.8
    • Hole Area (sq. in). 2.45
    • Hole Saw (dia.) 2 3/8
    Product Brochure
    Installation Guide
    Technical Drawing
    Universal Cable Pass Thru & Wall Anchor System

  • Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking
  • Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture

    The SPEEDPORT™ is the first universal cable pass thru, fastening and wall anchor system. The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation.

    Installation is quick and simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Low voltage brackets are no longer needed - reducing labor and a whole lot of mess from hand cutting large rectangular holes. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.

    Unmatched versatility, ease of installation and its cost/labor reducing features make the SPEEDPORT™ the ideal solution for your cable pass thru and mounting needs.



  • SPEEDPORT SC - Universal Cable Pass Thru, Fastener & Anchor System 2-Inch Hole Size
    R1SPSC-WWhite
    R1SPSC-BBlack
    R1SPSC-AAlmond
    R1SPSC-LALight Almond
    R1SPSC-IIvory
    R1SPSC-BRBrown


    Universal Cable Pass Thru, Fastener & Anchor System

  • Snap-in Screw Cap Provides Added Strength for Mounting Heavier Items on the Wall
  • Cable Pass Thru and Fastener in One, Easy to Install Anchor
  • Reduce Cost and Labor of Installation - Low Voltage Brackets No Longer Needed
  • Holds Up To 30lbs.
  • 2 inch hole size
  • Quick & Simple Installation
  • Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking
  • Ideal for : Box Speakers on Wall • Sound Bars • Wireless Access Devices • Security Cameras

    The Speed Port™ is the first universal cable pass thru, fastening and wall anchor system. The Speed Port™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting.


  • Dècor Splitport™
    DC2WHWhite
    Includes: (2) 3/4 Multihead Screws
    Sold in Master Packs of 25
    Patent Pending
    Product Brochure
    Technical Drawing
    The innovative one-piece design features a break on one side for bending open and close for easy cable pass through. The grommet is integrally molded to the strap and won’t come loose while installing cables. The Dècor Splitport™ design is perfect for both wall and ceiling installations for audio, video, security, and office networking.
  • One Side Split for easy cable pass through
  • Metal Strap and Flexible Grommet
  • Gang together for large cable runs
  • Use a Utility knife to expand the slit length
  • Suggestions &
    Product Ideas

    Got a winning idea?